Extensive range of LOLER inspection, test and repair services

LOLER Inspection Test and Repair

The Cylinder Service Centre can provide full technical support for LOLER inspection and test.

LOLER stands for the Lifting Operations and Lifting Equipment Regulations that came into force in December 1998. It replaced existing legal requirements relating to the use of lifting equipment, for example the Construction (Lifting Operations) Regulations 1961, the Docks Regulations 1988 and the Lifting Plant and Equipment (Records of Test and Examination etc) Regulations 1992.

In addition to the requirements of LOLER, lifting equipment is also subject to the requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER).


Generally, the Regulations require that lifting equipment provided for use at work is:

  • strong and stable enough for the particular use and marked to indicate safe working loads;
  • positioned and installed to minimise any risks;
  • used safely, ie the work is planned, organised and performed by competent people; and
  • subject to ongoing thorough examination and, where appropriate, inspection by competent people

Service Details

All repairs are subject to our fault diagnostic process before we begin work to make sure we are working in the right area and so we can discuss technical issues and associated costs with the customer concerned.

All parts supplied and repairs have a full 12 month warranty which includes both parts and labour.



Typical Equipment Serviced

The Cylinder Service Centre is not is a position to monitor safe working practices, but our coverage in this area is nonetheless extensive, providing the following wide ranging list of services:

  • Hookloader: Hooklift testing, inspection & repair
  • Skiploader: testing, inspection & repair
  • Sheeting Systems: fitted and/or repaired; new nets/sheets supplied and fitted
  • Autolube systems: repaired, tested and fitted
  • Wet kits: Power Take Off (PTO), pumps, valves, steel pipework and tanks all supplied and fitted
  • Tipping gears: front end, underfloor and 3 way all supplied, or repaired and tested and fitted
  • Ejector Cylinders: supplied, or repaired and tested and fitted
  • Compactor rams: supplied, or repaired and tested and fitted
  • Hook replacement: supplied, or repaired and tested and welded or bolted
  • In line boring for hookloader or hooklift.
  • Main frame, Sub frames or hinges repaired and tested and fitted
  • Spec lifts: recovery truck repairs
  • Scissor Lifts

We also supply the following:

  • Hydraulic Oil
  • Cab PTO Controls (Power Take Off)


If you are looking for support on LOLER inspection and test, The Cylinder Service Centre is a good place to start. Please get in touch to arrange your LOLER inspection and test today.