The testing requirements for the work that Cylinder Service undertakes are so specialised and varied that we had a real problem finding a machine that would do the job for us. So much of a problem that we ended up designing and building our own pressure testing rig.
Finely tuned in full consultation with the UK Health and Safety Executive, we now have a rig that allows us to make challenging evaluations of repaired, or newly built equipment in an environment that is safe for our employees and visiting customer representatives alike.
The pressure testing rig is a fully enclosed testing cell with observation panels and pendant controls for the directional control valves.
Pumps cannot be started until the doors are closed. Upon sensing pressure, in any line, the doors are automatically locked. The doors are fully interlocked and so, should the doors be forced open, the testing pumps shut down
A flashing beacon indicates testing in progress - something that is clearly visible around the workshop.
IBS cubes with quickchange connectors form the reservoir. This means that production, or operational fluids supplied by customer can be used for testing if required.
The rig has a 12 metre long bed and so is able to test cylinders up 6 metres long within the enclosure. The maximum bore size that can be tested is 400mm.
There are 2 pumps in the rig, each producing 55 litres/minute at 300 bars for standard testing on mineral oil. There are flow controls fitted to each pump for testing small cylinders at low speed with stepless adjustment down to zero flow.
Adjustable pressure control valves allow for low pressure testing which can go as low as 30 bars.
The pumps are normally run independently enabling both ends of the rig to be used simultaneously, but the flows can be combined for fast fill of large cylinders.
The rig also has an integrated intensifier producing up to 1400 bar for HP jacking cylinders.
For testing cylinders with fire resistant fluids, the rig has an integrated power unit.
Pneumatic testing can also be carried out within the enclosure.
If you would like more information about our pressure testing rig or any testing requirements you may have in line with new build or repaired cylinders, then please get in touch for a free, no obligation, initial consultation.